Thanks for visiting Industrial Energy Efficiency. Please remember to bookmark this page Led Work. If you found what your looking for, then don"t forget to click an appreciation button below for this post.
Led Work
How Do Leds Work
LEDs, or light emitting diodes, are an electronic light source. LEDs were first discovered in Russia in the mid 1920's however no commercial use could be found for them until 1962 when they were introduced as a commercially viable electronic component. Early LED's were manufactured from gallium arsenide and produced a low intensity red and infrared light. Now other materials are added to the gallium allowing the creation of shorter light wavelengths and varying colours.
LEDs, like all diodes, are made of very thin layers of semiconductor material, one layer will have an excess of electrons, while the next will have a deficit of electrons. The LED consists of a chip of semiconducting material impregnated with other materials to produce the required colour. current flows easily from the positive of the chip into the negative, but will not flow easily in the opposite direction - cathode or P-type, to the negative side - cathode or N-Type. This is commonly known as a P-N Junction. Charge-carriers, electrons and holes flow into the junction from electrictrodes with differing voltages. When an electron meets a hole, it falls into a lower energy level, and releases energy in the form of a photon
The wavelength, or colour of the light emitted depends on the energy gap or bandgap of the materials used in the manufacture of the P-N Junction. LEDs are all manufactured from direct bandgap materials to produce light in the visible spectrum. Typcial indicator LEDs required very little power to operate, generally between 2V - 4V at no more than 20mW - 7W - 8W LED chips are now being made available to the general illumination market by manufacturers, and it is estimated they will directly replace incandescent lightbulbs within the next 5 years. Higher power and light output poses specific challenges for LED chip manufacturers to create a reliable product for the commercial market.
Today's high power LED's require much larger semiconductor dies for mounting, and also needed specially designed heat sinks to remove the excess heat from the semiconductor. Heat drastically reduces the life expectancy of the diode. LEDs are the most efficient form of lighting available today. LED manufacturer Lumileds in 2002 released a 5W LED chip. In 2003 Cree produced the first commercially available white LED with a luminous efficiency of 65lm/W. In 2008 Nexxus Lighting released the Array range of LED lamps, with a luminous efficiency of 105lm/W, the brightest, most efficient LED available commercially today. By comparison, halogen and incandescent lamps have a luminous efficiency of around 15lm/W, while fluorescent tubes produce 100lm/W. With LED manufacturing technology improving daily, it is easy to see why LEDs will be the lighting source of the future.
About the Author
Mike Brunt is a director of Specialized Lighting Concepts, and New Zealand company that has been at the forefront of fibre Optic, LED and solid state lighting technologies, with 8 years experience in working with and introducing these products to a new marketplace. http://www.specializedlightingconcepts.co.nz mike@specializedlightingconcepts.co.nz

If you are looking for a different item here are a list of related products on Industrial Energy Efficiency, please check out the following:




























































































