You discovered our blog Industrial Energy Efficiency. Please Remember to bookmark this page Polypropylene Filter. If you enjoy our post Polypropylene Filter, show your love by hitting one of the social media buttons below for this page.
 HEPA Air Purifier + Ionizer Cleaner, Polypropylene, ColdCatalyst Filter & Carbon US $99.95 
|
 10" Water Polypropylene Cartridges Sediment Filter US $5.54
|
 Lot of 16 US Filter PO10G4S Polypropylene Filter Bag US $34.00
|
 4 FILTER ELECTRIC AIR PURIFIER, HEPA Polypropylene Cold Catalyst Carbon Filters US $159.81
|
 NALGENE 145-2045 Polypropylene Analytical Test Filter Funnel -50Units- (M1309) US $165.00
|
 Big Blue polypropylene sediment filter 5micron 10" x 4.5" NEW US $10.00
|
 FILTERS, Polypropylene Membrane, Millipore PP8004700, 80um, 47mm 100ct, NIB US $85.00
|
 Culligan P1 Spun Polypropylene Case of 6 Filters US $24.99
|
 3m Nexcare Ear Loop Filter Mask - Polypropylene, Polyethylene, Aluminum - 20 / US $12.30
|
 Filter Pump Industries(Penguin) 4C-2B Polypropylene Chamber, 300-570 GPH, 20" US $144.00
|
 US Filter Dual-Gradient Density Polypropylene Sediment Filter Cartridge DGD-5005 US $19.95
|
 Pleated Filter Polypropylene Media Cartridge 1 Micron 9.75"x 2.6", (12-pack) US $110.31
|
 Spectrum Spectra/mesh 148-529 POLYPROPYLENE 47MM 1000µm 10/PK Macroporous Filter US $110.00
|
 Pentek WP5BB20P String Wound PolyPropylene Filter US $21.95
|
 Pleated Filter Polypropylene paper 5 Micron 9.75"x 2.6" (12-pack) US $82.63
|
 Pleated Filter Polypropylene paper 5 Micron 9.75"x 2.6" (24-pack) US $155.16
|
 KTROSYSD Food Trade Polypropylene Cartridge For Water Filter Systems US $26.43
|
 Healthsmart ELAIRFL 4-Stage Replacement Filter For ELAIR Polypropylene Filter US $27.99
|
 Pleated Filter Polypropylene Media Cartridge 20 Micron 9.75"x 2.6" (12-pack) US $80.15
|
 Pleated Filter Polypropylene Media Cartridge 20 Micron 9.75"x 2.6" (24-pack) US $150.68
|
 Pleated Filter Polypropylene Media Cartridge 30 Micron 9.75"x 2.6" (12-pack) US $80.15
|
 Pleated Filter Polypropylene Media Cartridge 30 Micron 9.75"x 2.6" (24-pack) US $150.68
|
 Sediment Filter Cartridge by Sears Ultra Dense Polypropylene US $3.95
|
 Pentek WPX25BB97P Fibrillated Polypropylene Filter US $16.99
|
 POLYPROPYLENE SEPARATORS, Filters, 25 mm 500 ct, Pall 61756, SEALED US $179.95
|
 36 Kirby Vacuum Filter Bags, White, Polypropylene HEPA II HII~early G10 204803 US $105.90
|
 LOT OF 2 NEW PENTEK P5-20 PENTAIR WATER SPUN POLYPROPYLENE FILTER CARTRIDGES US $34.99
|
 4 Polypropylene Felt Filter Bags 100 Microns 7" x 16-1/2" NEW (CJ3) US $24.95
|
 Pall Polypropylene Filter Housing PCY1RFGN16H13 3Pcs US $150.00
|
 5 Polypropylene Felt Filter Bags 100 Microns 7" x 16-1/2" NEW (CK1) US $29.95
|
 Purwater Water Filter String Wound Polypropylene - Model SW05-S - 5 Micron US $3.99
|
 Kirby Vacuum White 6/PK Cloth Polypropylene Filter Bag HEPA II 204803 US $17.95
|
 Kirby White Cloth Polypropylene Filter Bag 6/PK w/ BELT 204803, 301291 US $18.95
|
 Polypropylene Water Jet Vacuum Filter Pump Hydro Asp US $39.95
|
 SPUN POLYPROPYLENE SEDIMENT FILTER CARTRIDGE MODEL: P5 US $6.00
|
 Kirby's Best White Polypropylene Filter Bags. 126 Bags, 21 Six Packs 204803 US $355.00
|
 54 Kirby White Filter Polypropylene HEPA II Bags 204803, 9 Six Pack. US $158.00
|
 Super Giant Enterprise FK-2006 Polypropylene Filter Chamber, 6-20" Cartridge, PP US $386.00
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 2, 200/100 Micr. {71C} US $59.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 1, 200/100 Micr. {72A} US $39.95
|
 5 - Industrial Grade Polypropylene Mesh Filter Bags, Size 3, 200 Microns {71D} US $19.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 2, 50/25 Microns {72A} US $59.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 12, 25 Microns {72B} US $19.95
|
 5 - Industrial Grade Polypropylene Mesh Filter Bags, Size 1, 600 Microns {73B} US $29.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 11, 10 Microns {73C} US $14.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 1, 25/10 Microns {74C} US $39.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 2, 50 Microns {75A} US $29.95
|
 5 - Industrial Grade Polypropylene Mesh Filter Bags, Size 3, 800 Microns {76C} US $19.95
|
 5 - Industrial Grade Polypropylene Felt Filter Bags, Size 1, 100 Microns {76D} US $24.95
|
 GE Osmonics Selex Filter SX01-40-ESV Polypropylene 40" Reverse Osmosis Filters US $150.00
|
 Shelco polypropylene meltblown filter cartridge MB20-29.25 20micron 30" (30in) US $3.04
|
 Shelco polypropylene meltblown filter cartridge MB5-10 5micron 10" (10in) 24/box US $28.50
|
 Polypropylene 42 ft2 Komline Filter Press 470mm US $39,999.00
|
 Polypropylene PP Anode Filter Bag Acid Alkali Resistant US $7.11
|
 Natural Polypropylene filter housing 10in x 3/4in (3/4") (150150) US $24.00
|
 Food Trade Polypropylene Cartridge for Water Filters US $6.40
|
 (40) Purtrex Filter PX05-9 7/8 5 Micron Polypropylene 9 7/8" 1193023 NEW US $165.00
|
 USED 36" SQUARE POLYPROPYLENE FILTER PRESS PLATES US $300.00
|
 2 Pieces Amiad 1-0702-4252-0000 Polypropylene 3/4 NPT Filter Housings New US $35.00
|
 Lot of 6 Parker 8R10A Cotton & Polypropylene Filter Cartridges 100 Microns NEW US $22.50
|
 Polypropylene Cartridge for KTROSYS KTRO5 Filter System US $32.50
|
 FILTER CAPSULE, Supor Membrane, 0.2 um, Gelman 12995 NIB, Polypropylene PES US $32.95
|
 Lot of 20 U.S. Filter BP-410-100 Semi-Rigid Polypropylene 4" Filter Bag Size 6 US $85.00
|
 Solen Angela brand Fast Caps, filter caps for HiFi or guitar amps Polypropylene US $70.00
|
 Big Blue polypropylene sediment filter 5micron 20" x 4.5" NEW US $17.00
|
 ZHAFD2001 Pentek 20" Nat Polypropylene Filter Housing US $75.00
|
 Polyspun Polypropylene Water Filter Cartridge US $14.39
|
 Filter, Polypropylene, Disposable, PALL PFC08C1 US $12.00
|
 200 Micron Polypropylene Size 2 Pressure Vessle Sock Filter Bag POG200 (#909) US $4.50
|
 WPX25BB97P Fibrillated Polypropylene String-Wound Water Filter Cartridge US $8.99
|
 10" string wound sediment filter polypropylene9.5x 4.5" US $5.00
|
 WOUND POLYPROPYLENE CARTRIDGE SEDIMENT FILTER 4.5 X 20" US $22.50
|
 String Wound Filter Big Blue Polypropylene 5 Micron 9.75" (8-pack) US $99.65
|
 (2) Pall Polypropylene Filter Housing SCY1RFG12H4 US $125.00
|
 Lot of (4) General Electric(GE) Hydrex II GX10-20 Filter, 10 Mic. Polypropylene US $32.00
|
 25 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel US $4.35
|
 5 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel WVO US $4.35
|
 10 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel US $4.35
|
 50 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel US $4.35
|
 100 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel US $4.35
|
 1 Micron Glazed Polypropylene 7" x 16" Filter Bag Felt Size 1 Sock Biodiesel WVO US $4.95
|
 Lot of 2 x 25 Micron Glazed Polypropylene 7" x 16" Filter Bags Sock Biodiesel US $7.99
|
 Lot of 2 x 10 Micron Glazed Polypropylene 7" x 16" Filter Bags Sock Biodiesel US $7.99
|
 Lot of 2 x 5 Micron Glazed Polypropylene 7" x 16" Filter Bags Sock Biodiesel US $7.99
|
Polypropylene Filter
Landmark Coatings - Plastic Media Blasting an Industrial Polypropylene Filter Housing
Irrigation systems water filtration, filter selection and recommendation [1 out of 5]
Water filtration is very important to almost any irrigation system.
Appropriate filtration can help to extend the life and improve the maintenance of any irrigation system. For drip or micro sprinklers emitters, filtration is a basic need to avoid clogging.
A sand grain, rust and other materials can block micro and mini and sprinklers’ nozzles which could cause unintentional plants dehydration. Many water sources like reservoirs, rivers and of course waste water contain a lot of organic materials such as alga and bacteria, that have to be removed especially from drip irrigation, mist spray [Nebulization] and micro-sprinkle systems, as small as they are. Not removing those substances can lead to creation of dirt accumulations and colonies of harmful material within the emitters and the rest of the equipment. Naturally, rust and sand grains are a safe platform for coating by organic materials and creating large chunks within the systems, causing a total blockage of water transferring.
Filtration methods common in irrigation systems
Screen Filters
Screen filters are probably the oldest and most common in irrigation systems. They are excellent in their ability to remove hard particles like rust. But when it comes to sand, it can get stuck inside the screen and rapidly block it. Usually Screen Filters are less expensive. Delicate organic materials cross the screens and raw material usually smears on top of the screens, deriving a more frequent cleaning interval. The common solution in Screen Filters is enlarging the filtration to expand the cleaning intervals. Today, there are several modern solutions of self-cleaning Screen Filters. This is done by back-washing and / or repeat wash using a sprinkler with internal spraying nozzles for cleaning (similar methods used in commercial dish-washers machines). In order to wash the filter in clean water, it takes at least 2 parallel filters, so that one contributes clean water to wash the other. Semi automatic screen filters are available as well, when the filter is being washed by turning a manual crank that rotate internal nozzles spine or a circular brush. If there is no automatic self-cleaning mechanism, the use of Screen Filters is not recommended in case the water contains organic materials. Clogging of material on top of the screens causes a large pressure difference that can bring to the collapse of the screen, or decreasing and even full stopping of irrigation water flow. The Screen Filter is cleaned by removing the screen and washing it under strong flow of water or by using a suitable brush. The common screen filtration elements in the market are usually made of Stainless Steel, Polypropylene or Nylon. Semi automatic screen filters are available as well, when the filter is being washed by turning a manual crank that rotate internal nozzles spine or a circular brush. If there is no automatic self-cleaning mechanism, the use of Screen Filters is not recommended in case the water contains organic materials. Clogging of material on top of the screens causes a large pressure difference that can bring to the collapse of the screen, or decreasing and even full stopping of irrigation water flow. The Screen Filter is cleaned by removing the screen and washing it under strong flow of water or by using a suitable brush. The common screen filtration elements in the market are usually made of Stainless Steel, Polypropylene or Nylon.
[1 out of 5]
About the Author
Koby Zucker
Irrigation expert with many years of field experience, wish to share his experience in irrigation projects planning and erecting around the globe.
irrigation systems consultancy
irrigation systems planning
If you are looking for a different item here are a list of related products on Industrial Energy Efficiency, please check out the following:
Frequently Asked Questions...
Best method to filter a chloroform solution?
I'm trying to purify a lipid dissolved in chloroform. In case this is not clear, the chloroform is the solvent - I am not trying to filter out the chloroform. I am trying to filter out lipid aggregates above a certain size.
What is the best method to do this? I've been looking at bottle top vacuum filters with a PTFE, PVDF, or regenerated cellulose membrane, but I've noticed almost all these bottle tops are made of polypropylene, which I understand only has limited compatibility with chloroform. I obviously don't want to leech anything out into my solution.
I've also looked at syringe filters, but again, same case with the filter housing.
Are there specially made products for halogenated hydrocarbons solutions (eg. made with glass housing)? Any links to the big suppliers (eg. Sigma, VWR, Fisher) are also appreciated. Thanks!
Answer:
Do you mean polycarbonate? Polypropylene IS resistant to chloroform. You're only filtering, after all, not reacting or storing in it, so the exposure is what - 10 seconds? The flanges will likely last longer than your career as a grad student. There's no plasticizer in polypropylene, and evidently there is nothing but micelles and solvent in your samples, so what harm do you foresee? You can always filter a sample and run it through the HPLC to see what new organics have crept into the solvent. Or, if you're not wedded to chloroform, you can resuspend your micelles in a more polar solvent (though to my way of thinking that's a lot dicier than using chloroform in polypropylene).
Or, find a paper with a prep step like this one, and contact the author of that paper and ask for procedural details.
h
